The increasing popularity of glass walls and doors in both residential and commercial buildings has brought with it a need for added safety and compliance measures. For this reason, it is highly recommended that builders and contractors install safety strip to glass walls. Safety strip can provide a secure barrier between people and glass walls to prevent potential injuries and accidents.

Safety strip is a vinyl-based film that is applied directly to glass walls. It is designed to prevent accidental contact with glass walls by providing an extra layer of visual queue to see the glass, if it is too perfectly clean. The film is easily visible, making it easier to identify areas of potential hazard. Safety strip also helps to protect against shattering in the event of an impact or breakage.

Safety strip is an essential additional step for builders and contractors when installing glass walls and doors. The film needs to be applied to the glass wall in order to comply with most building and safety standards. Without safety strip, builders are at risk of putting occupants of a building at risk of potential harm or injury.

In addition to safety, safety strip is also a great option for promoting privacy. Window film helps to create a barrier between what can be seen inside a building, and what’s visible from the outside. This is especially useful when the glass is used in bathrooms, offices, or other areas where people might want additional privacy.

Large format safety strip can also help to reduce energy costs by blocking out UV rays. Window films can help to reduce the amount of heat that enters a building through the glass. This can help to lower your energy bills and keep your building cooler in the summer.

Installing safety strip is a relatively simple process and can be completed by a certified signage installer. The process involves cleaning the glass surface with isopropyl and measuring it to ensure that the correct amount of material is used. Once the film is cut to size, the wax paper pealed from the back and then applied to the glass with a lightly soapy water, and pressed down. It is important to ensure that the safety strip is properly installed and that no air bubbles or gaps are present.

Installing safety strip on glass walls is an important step for builders and contractors to protect occupants of a building and to comply with safety regulations. Safety strip can also provide additional benefits such as the promotion of privacy and energy efficiency. Be sure to invest in safety strip for your glass walls to keep everyone in your building safe and secure.

Here, we provide an overview of how to properly install vinyl safety strip, including the recommended height at which it should be installed.

First, you should determine the correct location for the vinyl safety strip. Generally, you should choose a location that has clear visibility and is not obstructed by furniture, walls, or other objects. You should also consider the amount of foot traffic that will pass through the area and make sure the strip isn’t in the way of people walking.

Next, you’ll need to measure the area that you’ll be installing the vinyl safety strip. Measure the height and width of the area to ensure the strip will fit properly.

Once you’ve determined the location and size of the area, you’ll need to purchase the vinyl safety strip. You can purchase vinyl safety strip in strips or in rolls, depending on the size of the area you’re working with.

When you’re ready to install the strip, make sure you have the necessary supplies. You’ll need a measuring tape, a level, a hammer, a drill, and the necessary hardware for attaching the strip to the floor or wall.

The recommended height for installing vinyl safety strip is between 2 and 6 inches from the floor. This will help ensure that it is visible to people walking in the area but not so high that it is a hazard in itself.

Once you’ve determined the location, size, and height of the area, you can begin the installation. Start by measuring and marking the area where you’ll be installing the strip. Then, use the drill and the necessary hardware to attach the strip to the floor or wall.

Once the strip is securely attached, you can use the level to make sure the strip is installed at the correct height. Finally, use the hammer to gently tap the strip into place.

Vinyl safety strip is a great way to ensure the safety of your business and its customers. By taking the time to properly measure, install, and maintain the strip, you can help ensure that your business stays compliant with safety regulations.